36 www.electrolux.com
Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents vibration,
noise and the movement of the
appliance when in operation.
13.2 Positioning
Use a spirit level on the top and
side of the washer-dryer to check
the levels.
If you do not have a spirit level, as a
guide use the edge of a door frame,
cupboard or bench to check that the
washer-dryer is leveled.
It is important that your washer-
dryer stands firm and leveled on
the floor to ensure correct
operation. The appliance must not
be installed behind a lockable
door, a sliding door or a door with
a hinge on the opposite side to
avoid restricting the washer-dryer
door.
10.
11.
Pull out the plastic spacers.
12.
Put the plastic caps in the holes.
You can find these caps in the user
manual bag.
Remove the three transit bolts.
A
1
2
3
To Next Page
Loading...
