Need help?Do you have a question about the Electrolux FMB330RGB0 and is the answer not in the manual?
General| Type | Built-In |
|---|---|
| Category | Dishwasher |
| Number of Place Settings | 13 |
| Control Type | Electronic |
| Number of programs | 6 |
| Delay start | Yes |
| Child lock | Yes |
Covers essential safety practices for appliance repair, including avoiding repairs with doubt and proper power disconnection.
Highlights critical information regarding replacement parts, grounding, and general cautions for service personnel.
Describes the electrical mechanical timer and selector switch functions, including cycle selection and options like high temp wash.
Explains the door latch assembly, its safety microswitches, and how they halt operation when the door opens.
Details the detergent and rinse aid dispenser mechanism, its wax motor actuator, and how to test its functionality.
Outlines the dishwasher's wash cycle stages, water filling, spray arms, heater use, and the wash motor assembly.
Covers the drain pump's function, design, and the electrically operated water valve with its flow restrictor.
Describes the lower and center spray arms' rotation and the dishwasher's three-filter system for water cleaning.
Explains the control/safety thermostats, the heater element for water temperature, and the air gap for drying.
Details the sump's role in collecting water for the pump and the delivery tube system for spray arms.
Covers door hinge assembly, the tub door seal installation, and the upper rack support rollers.
Explains the air vent location, housing, baffles, and its role in facilitating drying by air circulation.
Provides step-by-step instructions for removing the outer door panel and the console assembly.
Details the procedures for disassembling and servicing the timer, door latch, and selector switch components.
Outlines the steps required to remove and service the vent housing/grate and the detergent dispenser assembly.
Explains how to remove and reinstall the lower and center spray arms and the main tub door seal.
Provides instructions for replacing the water valve and the thermostats with their mounting bracket.
Details the process for servicing the pressure switch and adjusting the door springs for proper tension.
Describes the steps to remove, service, and reinstall the door hinge assembly, including locking clips.
Provides instructions for removing and replacing the integrated wash motor and pump assembly.
Outlines the procedure for disconnecting and replacing the dishwasher's drain pump.
Details the steps for removing and installing the heater element and the sump assembly.
Lists and illustrates the part numbers for components of the door and control panel assembly.
Provides part numbers and diagrams for various components within the main dishwasher tub structure.
Details the part numbers for the wash motor, drain pump, and associated components like hoses and filters.
Lists and illustrates the part numbers for the upper and lower dishwasher racks and their accessories.
General safety advisory for individuals performing service, emphasizing risks and responsibilities.
Crucial instruction to always disconnect power and reconnect grounding devices after service.
Lists key operational specifications including electrical supply, water flow rate, and temperature requirements.
Identifies typical areas and reasons for leaks in the dishwasher, such as door seals and hose connections.
Addresses common issues like dishes not cleaning or drying properly, and their potential causes.
To Next Page