Need help?Do you have a question about the Electrolux FGCD2456QW and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | FGCD2456QW |
| Type | Built-In Dishwasher |
| Color | White |
| Capacity | 14 Place Settings |
| Control Type | Electronic |
| Number of Wash Cycles | 6 |
| Energy Star Certified | Yes |
| Width | 24 inches |
| Noise Level | 49 dBA |
| Child Lock | Yes |
| Programs | Auto, Heavy, Normal, Rinse, Quick |
| Delay Start | Yes |
Provides definitions for safety alert symbols and terms used in the manual.
Lists essential safety precautions for servicing the appliance.
Offers essential advice and recommended steps for service technicians.
Identifies the location of LEDs and buttons used for service functions.
Details how to access and operate the Program Presentation Mode.
Explains the procedure to enter the full function Service Mode.
Describes how to retrieve and display the last three error codes.
Details the process of testing individual actuators sequentially.
Explains the test that activates all LEDs and erases error codes.
Describes how to run a short wash cycle for testing purposes.
Explains the classification and storage of error codes.
Details how error codes are displayed on appliances with and without displays.
Provides detailed descriptions for various error codes and their causes.
Summarizes error codes, reasons, unit response, and checks for failure.
Provides a general overview and identification of key product components.
Illustrates and describes the rear side components and connections of the appliance base.
Details the step-by-step process for assembling the bottom tray.
Explains the function and purpose of the metal cover for the main board.
Illustrates the grounding connection of the inner fire shield plate to the metal cover.
Diagrammatically explains the flow of water through the appliance.
Details the components and flow paths within the appliance's hydraulic system.
Presents a visual overview of the entire hydraulic system and its components.
Describes the sump circulation motor, pump, and heater assembly variants.
Details the wash pump assembly that includes an integrated heating element.
Illustrates and describes the Omega heater and pump components.
Explains the sump and drain system, including different motor variants.
Describes the function and operation of the flow controller.
Details the pressure sensor specifications, including frequency and tolerance.
Explains the smart sensor technology for dirt detection and cycle adjustment.
Describes the features and improvements of the new dispenser.
Details the specifications and procedure for multi-dosage rinse aid and detergent delivery.
Illustrates the control board and its connection features for specific models.
Provides step-by-step instructions for replacing the control board.
Presents an example wiring diagram for the PB100 model.
Presents an example wiring diagram for the PB200 model.
To Next Page