28
5.16 Dispenser
The new dispenser includes the following features:
• Low voltage driving - 5VDC => Safety
improvement
• Multiple dosage => Performance/Quality
improvement
• Sliding lid => Performance/Quality improvement
5.17 Multi Dosage - Specification
• PERFORMANCE
The dosage of the rinse-aid has to be independent of
the filling status of the container, as long as the refill
indication is not reached. After indicating the refill
minimum for another 2 dosage cycles, the nominal
volume has to be guaranteed.
Dosage Procedure – Multiple Dosage
The first activation impulse opens the detergent lid; no
rinse aid should be dosed into the tub.
With each further activation impulse a dosage volume
of 1.5 ml has to be dosed into the tub.
During Main Wash Phase – Detergent Lid Opening:
STEP ACTION TIME PURPOSE
1
Activation of
coil
0.3 S
Opening the
detergent lid to
release detergent
During Hot Rinse Phase - Rinse Aid Delivery:
STEP ACTION TIME PURPOSE
1 Dosage check
–
Check if rinse aid is
should be delivered
If 0 -> no delivery
the rinse aid
delivery process
should be stopped.
2
Activation of
coil
5 S
Delivery of dose
of rinse aid - 1,5 ml
nominal
3 Pause 10 S
Refill of dosage
chamber
4
Repeat from
Step 2
–
Number of dosages
according to set
level
To Next Page
Loading...
