Electrolux GA60GLVS - 10.4 How to select and start the programme Pre-rinse; 10.5 How to activate ​EXTRAS; 10.6 How to start the AUTO Sense program; 10.7 How to delay the start of a programme

• The display shows the programme
duration.
2. Activate applicable EXTRAS if desired.
3. Close the appliance door to start the
programme.
10.4 How to select and start the
programme Pre-rinse
1. To select Pre-rinse, press and hold
for 3 seconds.
• The light related to the button is on.
• The ECOMETER is off.
• The display shows the programme
duration.
2. Close the appliance door to start the
programme.
10.5 How to activate EXTRAS
1. Select a programme using MY TIME
selection bar.
2. Press the button dedicated to the option
you want to activate.
• The light related to the button is on.
• The display shows the updated
programme duration.
• ECOMETER indicates the updated
level of energy and water
consumption.
By default, options must be activated
every time before you start a programme.
It is not possible to activate or deactivate
options while a programme is running.
Not all options are compatible with each
other.
Activating options often increases the
water and energy consumption as well as
the programme duration.
10.6 How to start the AUTO Sense
program
1. Press .
• The light related to the button is on.
• The display shows the longest
possible program duration.
2. Close the appliance door to start the
program.
The appliance senses the type of load and
adjusts a suitable wash cycle. During the
cycle, the sensors operate several times and
the initial program duration can decrease.
10.7 How to delay the start of a
programme
1. Select a programme.
2. Double press .
The display shows 1h.
3. Press repeatedly until the display
shows the desired delay time (from 1 to
24 hours).
4. Close the appliance door to start the
countdown.
When you set the delay start, the remote start
is automatically activated.
During the countdown, you cannot change
the programme selection. You can change
the delay time in the app.
When the countdown is complete, the
programme starts.
10.8 How to cancel the delay start
while the countdown operates
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
If you cancel the delay start, you have to
select the programme again.
10.9 How to cancel a running
programme
Press and hold for about 3 seconds.
The appliance returns to the programme
selection.
ENGLISH 19