Problem Possible cause Remedy
The cookware is unsuita‐
ble.
Use suitable cookware. Re‐
fer to "Hints and tips".
The diameter of the bottom
of the cookware is too
small for the zone.
Use cookware with correct
dimensions. Refer to "Tech‐
nical data".
and a number come
on.
There is an error in the
hob.
Deactivate the hob and acti‐
vate it again after 30 sec‐
onds. If comes on again,
disconnect the hob from the
electrical supply. After 30
seconds, connect the hob
again. If the problem contin‐
ues, speak to an Authorised
Service Centre.
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a quali‐
fied electrician to check the
installation.
9.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
dealer will not be free of charge, also
during the warranty period. The
information about guarantee period and
Authorised Service Centres are in the
guarantee booklet.
10. TECHNICAL DATA
10.1 Rating plate
Model GK58TSITO PNC 949 599 186 00
Typ 62 B4A 06 AA 220 - 240 V / 400 V 2N 50 - 60 Hz
Induction 7.35 kW Made in Germany
Ser.Nr. ................. 7.35 kW
ELECTROLUX
10.2 Cooking zones specification
Induction cooking
surface
Nominal power
(maximum heat
setting) [W]
PowerBoost [W] PowerBoost maxi‐
mum duration [min]
Single triangle 1150 1600 10
Standard cooking
zone
2000 3000 10
www.electrolux.com22
To Next Page