0409
1
5
01103040
PageNotice Date
OPERATING
HANDBOOK
5. Operating incidents
The linen remains stuck
to the cylinder
Your washing is not rinsed correctly Check rinsing with a 1 %
phenolphthalein solution diluted in
alcohol. If this colorless liquid turns to
pink on the washing as it comes out
of the washing machine, and it still
contains detergents.
if the washing is insuffi ciently rinsed. Increase the number of rinsings if
necessary or reduce product doses.
Check that ironer separating ribbons
are intact.
Check the cylinder temperature.
The washing is not suffi ciently spun.
When the linen comes off
the dryer-ironer it is not
dry
The linen that you are trying to iron is
too thick.
Check the drying quality of your
washing machine.
Check operation of the heating.
Check operation and cleanliness of
the vacuum intake system.
Check the condition of ironing bands
(fi bers containing scale).
Check the pressure of the ironing
roller on the ironing cylinder.
Your washer-spin dryer has a spin
rating of below 300G.
You should plan on a short pre-drying
session in a dryer (5 – 10 mins).
The ironing speed is too high.
The ironing temperature is too low.
The residual moisture content of the
washing should be about 50 %.
Your linen is starched There is a risk of starch deposits
forming on the cylinder
Reduce the ironing speed.
Encountered problem Cause of problem Solution
To Next Page
Loading...