0409
5
4
01103040
Page
Notice
Date
OPERATING
HANDBOOK
Linen colouring
•
The brown coloring is due to detergent residues, and will disappear at the next washing.
• Colouring caused by the temperature being too high is permanent. Reduce the ironing
temperature or increase the ironing speed.
• The washing should be correctly rinsed so that it does not turn yellow and does not make
the cylinder dirty.
- Check the quality of the washing water (TH/TAC).
- Check the washing and rinsing cycles (see "phenolphthalein" operating incidents).
- Check incrustation of the washing (ash content).
The feed bands are not turning
•
This type of incident is normal when it only affects a few bands.
When washing will not engage any more, adjust the tension of all the bands by changing
the setting of the feed table.
Do not overtighten the bands.
The band must stop turning when you press on it with your fi nger. It must start again
when you remove your fi nger.
5. Operating incidents
To Next Page
Loading...
