Electrolux KBB5X - Page 24

24 www.electrolux.com
Procedure for blast chilling or freezing with food sensor
1. Press the ON/OFF key.
2. Select the required program and
press OK to con󰘰rm.
3. Select “Food sensor”, insert this in the
food and press OK to con󰘰rm.
5. The appliance runs the blast chilling
cycle until the set temperature is
reached.
At the end of the cycle, the appliance
will switch to holding mode.
Procedure for blast chilling or freezing with weight
*HQWOH&KLOOLQJr
%ODVW&KLOOLQJr
%ODVW)UHH]LQJr
1.5 Kg
0.5 Kg
1.0 Kg
4. Select the quantity and press OK to
con󰘰rm.
:HLJKW
)RRGVHQVRU
4. Modify the temperature as required
and press OK to con󰘰rm.
*HQWOH&KLOOLQJr
%ODVW&KLOOLQJr
%ODVW)UHH]LQJr
1. Press the ON/OFF key.
2. Select the required program and
press OK to con󰘰rm.
:HLJKW
)RRG6HQVRU
3. Select “Weight” and press OK to
con󰘰rm.
5. The appliance starts the blast
chilling cycle. The total time and
progressive time of the cycle
appear on the display.
At the end of the cycle, the appliance
will switch to holding mode.