Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
Step 4 Install the shelf supports in
the opposite sequence.
11.3 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Clean one oven at a time.
Before the catalytic cleaning
Turn off the oven and wait
until it is cold.
Remove all accessories
and removable shelf sup‐
ports.
Clean the oven floor and
the inner door glass with
warm water, soft cloth and
mild detergent.
Clean the oven with catalytic cleaning
Step 1 Step 2 Step 3 Step 4
To clean the top oven
set the function: .
To clean the main
oven set the function:
.
Set the maximum
oven temperature.
Duration: 1 h
After cleaning, turn
the knob for the
oven functions to
the off position.
When the oven is
cold, clean the
cavity with a wet
soft cloth.
11.4 How to remove and install:
Door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
The door is heavy.
CAUTION!
Carefully handle the glass,
especially around the edges
of the front panel. The glass
can break.
ENGLISH 23
To Next Page
Loading...
