Electrolux KDFGE40TK - Clock Functions

7. CLOCK FUNCTIONS
7.1 Clock functions
Clock function Application
Time of Day
To set, change or check the time of day.
Only the top oven works without the set time.
Duration
To set how long the oven works.
The function works only for the main oven.
End Time
To set when the oven turns off.
The function works only for the main oven.
Time Delay
To combine functions: Duration and End Time.
The function works only for the main oven.
Minute Minder
To set a countdown. This function has no effect on the operation of the
oven. You can set this function at any time, also when the oven is off.
7.2 How to set: Clock functions
How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a power cut or when the timer is
not set.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
Step 1
- press repeatedly to change the time of day. - starts to flash.
Step 2
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to set: Duration
Step 1 Set an oven function and the temperature.
Step 2
- press repeatedly. - starts to flash.
Step 3
, - press to set the duration.
The display shows: .
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4 Press any button to stop the signal.
Step 5 Turn the knobs to the off position.
10 ENGLISH