To Next PageTo Next Page
Need help?Do you have a question about the Electrolux KELVINATOR KSV70HRA and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Cooling Capacity | 7.0 kW |
| Heating Capacity | 7.0 kW |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Power Consumption (Cooling) | 2180 W |
| Noise Level (Outdoor) | 56 dB |
Diagnosing and resolving issues when the air conditioner unit fails to operate.
Identifies E0 error as a software or program chip fault on the main indoor PCB.
Troubleshooting communication protection faults between indoor and outdoor units.
Diagnosing E5 and E52 errors related to condenser coil and air temperature sensors.
Addresses E6 error, focusing on indoor evaporator coil temperature sensors.
Troubleshooting L2 and PA errors related to the condenser fan's operation.
Diagnosing issues when the compressor is not operating, checking terminals and wiring.
Checks supply voltage to the outdoor unit and AC voltage at PCB connection points.
Guides on checking compressor termination, sequence, and overload protector for P2 error.
Focuses on P4 error by checking compressor common terminal and wiring continuity.
Troubleshoots P91, LO, and E3 errors, examining evaporator fan and PCB connections.
