This document is a user manual for the Electrolux KGS6424SX hob, providing comprehensive instructions for its installation, safe operation, maintenance, and troubleshooting. The manual emphasizes safety information throughout, particularly concerning children and general safety practices.
Function Description
The Electrolux KGS6424SX is a built-in gas hob designed for domestic cooking purposes. It features four gas burners: one rapid burner, two semi-rapid burners, and one auxiliary burner, each controlled by a dedicated knob. The hob is equipped with progressive valves for precise flame regulation and a ceramic ignition candle with a metal electrode for easy lighting. It is designed to be installed in a kitchen unit, either with a door or above an oven, with specific requirements for ventilation and accessibility for maintenance. The appliance is suitable for various gas types, with instructions provided for adjusting to different gas supply pressures and replacing injectors if necessary.
Usage Features
The hob offers several features to enhance the cooking experience and ensure safety:
- Burner Ignition: To ignite a burner, the user must push the control knob down and turn it counterclockwise to the maximum gas supply position. The knob should be kept pushed for a short period (equal to or less than 10 seconds) to allow the thermocouple to warm up, which is crucial for maintaining the gas supply. If the burner does not light after a few attempts, the user is advised to check the correct positioning of the crown and cap. A safety warning advises against keeping the control knob pushed for more than 15 seconds; if the burner doesn't light within this time, the knob should be released, turned to the off position, and another attempt made after a minimum of one minute. In the event of an electricity absence, burners can be ignited manually using a flame while pushing and turning the control knob.
- Flame Adjustment: The hob is equipped with progressive valves, allowing for more precise flame regulation from maximum to minimum gas supply.
- Cookware Compatibility: The manual provides guidelines for the appropriate diameters of cookware for each burner size (rapid, semi-rapid, auxiliary) to ensure efficient cooking and stability. Users are advised to use stable cookware and center pots on the burners for maximum stability and lower gas consumption.
- Lid (Optional): For predisposed hobs, an optional lid kit is available. The lid serves to protect the hob from dust when closed and collects grease splashes when opened. It is important to ensure the hob is cold before closing the lid, and glass lids can shatter if closed while hot.
- Energy Saving Tips: The manual includes practical advice for energy-efficient cooking, such as ensuring burners and pan supports are correctly assembled, using appropriately sized cookware, centering pots, using only the necessary amount of water, always using lids on cookware, turning down the flame to simmer once liquids boil, and considering a pressure cooker for certain dishes.
Maintenance Features
Regular maintenance is crucial for the hob's longevity and performance:
- General Cleaning: The hob should be cleaned after each use. Users should always use cookware with a clean base. Scratches or dark stains on the surface do not affect operation. A special cleaner suitable for the hob's surface is recommended.
- Stainless Steel Parts: Stainless steel parts should be washed with water and dried with a soft cloth. For burnt food, fat, or stubborn stains, these should be soaked in a mild detergent for a few minutes before cleaning. Cleaning products specifically designed for stainless steel should be used to protect the surfaces. Corrosive chemicals, disinfectants, stain removers, rust removers, and immersion cleaners should be avoided.
- Pan Supports: Pan supports are not dishwasher-safe and must be washed by hand. They should be removed for easier hob cleaning. When replacing them, care must be taken to prevent damage to the hob top. Stubborn stains on enamel-coated pan supports can be removed with a paste cleaner. After cleaning, ensure pan supports are correctly positioned and aligned with the burner centers for proper operation.
- Burners (Caps and Crowns): The enamelled parts, caps, and crowns of the burners should be washed with warm soapy water and dried carefully before reassembly. The manual explicitly states not to clean burners in the dishwasher.
- Spark Plug: The ceramic ignition candle with a metal electrode (spark plug) must be kept clean to prevent difficult lighting. Users should ensure the burner crown holes are not obstructed.
- Periodic Maintenance: Users are advised to contact their local Authorized Service Centre periodically to check the conditions of the gas supply pipe and the pressure adjuster (if fitted).
- Troubleshooting: The manual provides a troubleshooting guide for common issues like the spark generator not activating, the flame extinguishing immediately after ignition, or an uneven flame ring. Solutions include checking electrical connections, fuse status, correct placement of burner caps and crowns, and ensuring the thermocouple warms up sufficiently.
- Disposal: Instructions for proper disposal of the appliance are provided, emphasizing recycling materials and not disposing of the appliance with household waste. Users should contact their municipal authority or local recycling facility.
Need help?
General
To Next Page