EasyManua.ls Logo

Electrolux KGV8473IK - User Manual

Electrolux KGV8473IK
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
KGV8473IK
EN User Manual | Hob 2
FR Notice d'utilisation | Table de cuisson 29

Table of Contents

Questions and Answers

  • J
    Jennifer RussellAug 11, 2025
    What to do if I cannot activate my Electrolux KGV8473IK?
    • B
      Brian HughesAug 11, 2025
      There are several reasons why you might not be able to activate your Electrolux Hob. It could be due to a blown fuse, a lack of gas supply, overheating from heavy use, objects on the sensor fields, not setting the heat setting within 50 seconds, touching multiple sensor fields simultaneously, or water/fat stains on the control panel. Check the fuse, gas connection, remove any objects, set the heat within the time limit, touch only one sensor, and clean the control panel. If the hob has overheated, wait for it to cool down.
  • H
    hubercatherineAug 18, 2025
    What to do if the flame does not light up in 3 attempts on my Electrolux KGV8473IK Hob?
    • A
      Amanda MurrayAug 18, 2025
      If the flame on your Electrolux hob doesn't light after 3 attempts, the electrical connection might be incorrect. Disconnect the hob and have a qualified electrician check the installation.
  • B
    Benjamin RyanAug 27, 2025
    How to check the electrical connection of my Electrolux Hob?
    • A
      Anna FlowersAug 27, 2025
      Ensure that your Electrolux hob is correctly connected to the electrical supply. Refer to the connection diagram to verify proper installation.
  • L
    Leslie KimSep 2, 2025
    Why does my Electrolux KGV8473IK Hob keep sparking after the flame goes out?
    • K
      Kathryn HubbardSep 2, 2025
      If you hear sparking after the flame goes out on your Electrolux hob, it could be due to air currents, incorrect placement of the burner cap or crown, or a dirty flame safety device. Ensure there are no drafts extinguishing the flame, correctly position the burner cap and crown. For a dirty flame safety device, refer to 'Care and cleaning'.

Electrolux KGV8473IK Specifications

General IconGeneral
TypeGas Hob
Number of Burners4
Control TypeKnob
Surface MaterialStainless Steel
Depth51 cm
Built-inYes
Cut-out Dimensions (WxD)56 x 48 cm
Ignition TypeAutomatic
Safety FeaturesFlame Failure Device
Burner TypesAuxiliary, Rapid
Gas TypeNatural Gas
Dimensions (WxD)580 x 510 mm

Related product manuals