Before use, please read the instruction carefully and store it properly.
Basic instructions
1. Fill the water to the "MAX" line and plug the iron into the mains.
2. There are total 4 temperature setting. Press Temperature up button or Temperature down
button to select suitable temperature according to the fabric.
When the temperature is going up, the selected temperature on screen will be blinking until
the solephate temperature reached the selected temperature.
3. Then you can use it to iron your clothes with steam by pressing the steam activation
trigger. The higher temperature setting, the larger steam output. The max steam output is
about 40g/min
If the temprature has not reached the selected temperature, press the steam trigger will be
no use, it can avoid the water drip.
4. Auto shut o function (if any)
It will swich the iron o automatically if it hasn't been used for a period of time - usually after
8 minutes idle in the upright position and 30 second when resting on the soleplate.
Move the iron slightly or press any button, it will return To the temperature that it had before
being switched o.
Using vertically - for garment and fabric steaming
1. If using the Textile Brush attachment carefully slide it over the tip of iron before turning on.
2. Once plugged in, set to a high temperature, either Cotton or Max settings.
3. Wait for the blinking to turn o. Pick up the iron and hold vertically, with the tip tilted slightly
forward.
4. Press the steam trigger and move the iron up and down the garment or fabric you want
to steam.
5. If the steam output declines, simply tilt the iron forward into a horizontal position and
then tilt back vertical to continue
DO NOT tilt the iron upside down while using vertically.
Instruction Manual
LX1700
To Next Page
Loading...
Need help?
General
