After ironing
1. Allow to cool completely. Unplug and empty the Water Tank.
2. Clean the Ceramic Plate and the Cover Plate with a damp cloth, removing any residues.
3. Store vertically on a clean, dry, at surface, with the cable wrapped around the Iron.
Technical Informations
After each use
1. Pour out the residual water inside the water tank, turn on the steam switch, and spray the
water vapor inside the machine.
2. Turn o the steam switch and pull the power cord out of the outlet.
3. Place the machine on a at desktop and wait for the product to be properly accepted
after cooling.
Nursing, cleaning and storage
(1) Do not use rough or corrosive detergents or solvents. (2) Please do not immerse the
steam scalding machine in water or other liquids. (3) Don't drop, throw it or try to bend it.
(4) Please do not attempt to disassemble the decomposition products. (5) Empty the water
tank after each use. (6) Avoid storing products in damp places. (7) Do not close to the
heat source or let the sun shine directly on the product. (8) Always ensure that the steam
outlet hole is clean, scale-free and not blocked. (9) It is recommended to store the ironing
machine in a at position, such as in a drawer.
Power
Water Tank size
Wattage
Model
220-240V-50-60Hz
320ml
1700W
LX1700C
To Next Page
Loading...
Need help?
General
