Installation
The microwave can be fitted in position A or
B:
Position Niche Size W D H (mm)
A 560x550x450
B 560x500x450
Installing the appliance
1. Remove all packaging and check carefully for any signs of damage.
2. Fit the appliance into the kitchen cupboard slowly, and without force, until the front
frame of the oven seals against the front opening of the cupboard.
3. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
Fixing Option 1:
• Fix the oven in position with the screws
provided. The fixing points are located
on the top and bottom corners of the
oven.
Fixing Option 2:
• Please see the template sheet supplied with this oven.
Ensure the bottom of the oven is 85 cm or more above the floor. It is important to ensure
that the installation of this product conforms to the instructions in this operation manual
and the conventional oven manufacturer’s installation instructions.
D
Conventional
oven
Position A
Position B
Conventional
oven
4 mm
Conventional
oven
18
Installation
To Next Page
Loading...
