To Next PageTo Next Page
Need help?Do you have a question about the Electrolux MCC4060E and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | MCC4060E |
| Category | Microwave Oven |
| Language | English |
Information for service engineers regarding operation and service of the oven.
Critical warnings and advice for technicians performing service on the oven.
General appliance information including mandatory earthing requirements.
Describes indicators on the control panel.
Details the buttons and knobs on the control panel.
Specific layout and features of the EMC4090X control panel.
Control panel configurations for several microwave oven models.
Describes the oven's state when off and initial power-on sequence.
Details the sequence for high microwave cooking.
Explains power levels for microwave cooking.
Outlines the process for cooking with the grill element.
Covers the pre-heating phase for convection cooking.
Details convection cooking at different temperatures.
Explains operations for microwave/convection and microwave/grill cooking.
Shows time ratios for magnetron power output.
Describes automatic cooking and power reduction logic.
Details door opening, latch, stop, and monitor switches.
Explains the function of fuses, TC transformer, and thermal cut-outs.
Describes asymmetric rectifier, noise filter, motors, and heating elements.
Details how the convection heating system operates.
Describes the auto-damper's function in different cooking modes.
Summarizes damper operation based on cooking mode.
Procedures for testing the magnetron and measuring microwave output power.
Instructions for testing the primary, secondary, and filament windings.
Procedures for testing HV rectifier, asymmetric rectifier, and capacitor.
Testing procedures for switches, thermistor, and thermal cut-outs.
Tests for motor windings, noise filter, and blown fuses F1/F2.
Testing procedures for grill/convection elements and control panel assembly.
Procedures for testing key/jog units and relays.
Troubleshooting open foil patterns on the PWB.
Precautions for safely handling sensitive electronic components.
Procedures and precautions for servicing the touch control panel.
Lists tools needed for touch control panel service.
Additional safety and handling advice for servicing.
Crucial safety warnings before operating or servicing the oven.
Steps to remove the oven's built-in frame assembly.
Procedures for removing the outer case and high voltage parts.
Steps for replacing the high voltage transformer and magnetron.
Procedures for removing the control panel and replacing the fan motor.
Steps for replacing the turntable motor and convection components.
Procedures for replacing convection motor, connectors, lamp, and power cord.
Removal of grill elements and adjustment of door switches.
Detailed steps for removing and replacing the oven door.
Specifies the safety requirements for microwave leakage.
Outlines the steps for conducting a microwave leakage test.
Provides a quick reference for key component specifications and values.
Schematic diagram showing the oven's OFF state after plugging in.
Schematic showing the oven's OFF state when the door is open.
Diagram illustrating the circuit during microwave cooking.
Schematic showing the circuit during grill cooking mode.
Diagram illustrating the circuit during convection cooking.
Circuit diagram for dual microwave and convection cooking.
Circuit diagram for dual microwave and grill cooking.
