Electrolux N1190 - General Operation; Control Panel Overview; Using the Control Knob

7
3
1
2
General
2
3
1
General
Control Panel
The control panel is used to choose the drying program with options and
to start and stop the machine. The panel houses a control knob and a display.
Some machines also have two preset buttons.
Control knob
The control knob is used to select drying program
and any other available functions.
Turn the knob until the required program is
shown on the display.
Conrmyourchoicebypushingintheknob.
Repeat this procedure until all the required
functions have been chosen.
Display
Control knob
Preset buttons