EasyManua.ls Logo

Electrolux Premium - Description of Icons

Electrolux Premium
38 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Doc. No: 560001 EG
Page:3 Ed.1" 08-2014
From ser. no.:
Description of Icons
Standard Control
Premium
ICON
FUNCTION
DESCRIPTION
NORMAL FUNCTIONING
ON OFF
BLINK
COMPRESSOR
ON when the compressor starts. Flashes when the activation
of the compressor is delayed by safety times.
Compressor on
Compressor o Awaiting activation
FAN
ON when the fan starts.Flashes when the activation of the fan is
prevented due to external disabling or procedures in progress.
Fan on
Fan o Awaiting activation
DEFROST
ON when the defrost is activated. Flashes when the activation of
the defrost is prevented due to external disabling or
procedures in progress.
Defrost in progress
Defrost not in progress Awaiting activation
AUX
Si accende all’attivazione dell’uscita ausiliaria selezionata come
AUX (LUCE)ON when the auxiliary output selected as
AUX (or LIGHT) is activated.
AUX auxiliary output active
AUX auxiliary output not
active
ALARM
ON following pre-activation of the delayed external digital input
alarm. Flashes in the event of alarms during normal operation
(e.g. high/low temperature) or in the event of alarms from an
immediate or delayed external digital input.
Delayed external alarm
(before the time ‘A7’ elapses)
No alarm present
Alarms in norm. operation
(e.g. High/low temperature)
or immediate or delayed alarm
from external digital input
CLOCK
On in case of consultation history temperature . History temperature History temperature not
consulting
DOOR
Blinking in case of door open/On in case of alarm door open Auxiliary exit Light ON Auxiliary exit Light ON
Door closed
Door open
Service
Flashes in the event of malfunctions, for example E2PROM errors or
probe faults
Programming , set temperature
No malfunction Malfunction (e.g. E2PROM error or
probe fault). Contact service
HACCP
ON if the HACCP function is enabled.Flashes when there are new
HACCP alarms stored (HA and/or HF alarm shown on the display)
HACCP function enabled HACCP function not
enabled
HACCP alarm saved
(HA and/or HF)
TEMPERATURE
ON in case of high Temperature Alarm High temperature
Alarm low temperatutre in
history
No alarm
No alarm
Actual alarm ( high temperature)
Actual alarm ( low temperature)
DISPLAY
ON in case Low temperature

Related product manuals