0209
5
5
01106073
PageNotice Date
OPERATING
HANDBOOK
Overheating of cylinder sides (when feeding
is carried out on the centre of the cylinder too
often)
In the event that one of the two sides of the cylinder
overheats due to it being partially used, a fl ashing
message will be displayed on the screen, alternately
with the service screen.
The heating system of the machine will remain shut
down while this fl ashing message is displayed.
T
o continue ironing, allow the cylinder to cool until
the fl ashing display disappears.
Overheating of cylinder sides
Overheating of centre of cylinder (when small
linen units are too often fed on the centre of the
cylinder)
In the event that the centre of the cylinder overheats
due to it being used laterally, a fl ashing
message
will be displayed on the screen alternately with the
operating screen.
The heating system of the machine will remain shut
down while this message continues to be displayed.
To continue ironing, allow the cylinder to cool until
the fl ashing display disappears.
Overheating of centre of cylinder
Error
Overheating on side
Error
Overheating
5. Operating incidents
To Next Page
Loading...
Need help?
General
