0209
5
6
01106073
Page
Notice
Date
OPERATING
HANDBOOK
"Converter failure" message
If this message appears on the screen, the converter
has developed a fault. Please refer to the converter
manual for information repairing the fault.
The machine will only be able to be restarted once the
fault has been repaired.
To reinitialise the machine, press the central key
.
If the fault remains, switch off then switch back on the
power supply using the main switch.
Converter fault
Message: "Emergency stop-check button"
If the screen displays this message, one of the
emergency stop buttons has been triggered. The
machine enters safety mode, the heating is turned of
f
and the cylinder stops.
Check why the button was pressed and then reset it.
The screen should now display this message :
CONVERTER FAILURE
START
EMERGENCY STOP
RESET PUSH BUTTON
EMERGENCY STOP
START
You can now press on the central button on the panel
to return to the machine operation mode.
If resetting the button does not solve the problem, you
should then check the others.
Fault Emergency stop
5. Operating incidents
To Next Page
Loading...
Need help?
General
