Need help?Do you have a question about the Electrolux SkyLine PremiumS 6GN2/1 and is the answer not in the manual?
General| Energy efficiency class | A |
|---|---|
| Frequency | 50/60 Hz |
| Color | Stainless steel |
| Capacity | 6 GN 2/1 |
| Capacity (liters) | 60 |
| Voltage | 400 V |
| Installation type | Freestanding |
Provides information on safety symbols and general warnings for appliance use.
Details required Personal Protection Equipment (PPE) for various stages of appliance use.
Covers general safety precautions, guards, and modifications to the appliance.
Explains prohibition and meaning of safety signs and symbols used on or near the appliance.
Identifies potential risks and hazardous situations during appliance operation and maintenance.
Provides guidelines for safely moving, handling, and storing the appliance.
Details requirements and compliance for installing the appliance.
Specifies rules and precautions for connecting the appliance to the electrical power supply.
Outlines requirements and precautions for connecting the appliance to the water supply.
Gives instructions on how to position the appliance, including space and connection considerations.
Defines minimum clearances required around the appliance for ventilation and servicing.
Provides instructions on how to make the appliance unusable before disposal.
Explains where to find the dataplate for appliance identification.
Details the information found on the appliance's data plate.
States the copyright policy for the manual.
Instructions on how to store and keep the manual throughout the appliance's life.
Identifies the intended audience for the manual.
Defines key terms used within the manual for clarity.
Outlines the manufacturer's disclaimer for damages caused by improper use or maintenance.
Provides instructions for checking the appliance packaging upon delivery.
Specifies conditions for storing the appliance or its parts.
Provides electrical specifications like voltage, current, power for different models.
Lists the physical dimensions (width, depth, height) of various appliance models.
Offers conversion tables for water hardness and other units.
Introduction to the installation and assembly chapter, with a safety warning.
Specifies installation requirements applicable in Australia, including regulations.
Lists the tasks and prerequisites the customer must fulfill before installation.
Details the process of unpacking the appliance from its packaging.
Provides information on how to dispose of packing materials environmentally.
Gives minimum distance requirements for positioning the appliance for operation and maintenance.
Instructions for placing tabletop models on stands or cupboards for safety.
Details possible appliance combinations for stacking and fixing methods.
Explains how to fix ovens to the wall or floor using appropriate accessories.
Specifies hygienic covers needed for the AIR BREAK box.
Details the two water supply inlets and general connection notes.
Specifies the required water quality (pH, conductivity) for the CWI2 inlet.
Specifies the required water pressure range and flow rates for the inlets.
Details the requirements and methods for connecting the appliance's drain system.
Provides general rules and precautions for electrical connection compliance.
Step-by-step guide for installing the power cable for electric models.
Lists the safety devices equipped in the appliance, like thermostats and fuses.
Introduction to the appliance setup chapter, including initial checks.
Describes the initial setup procedure (Wizard) for touch screen models.
Details initial verification cycles for digital models after installation.
Explains the 3-step Wizard procedure for initial configuration and testing.
Information on the recyclability of appliance materials and environmental compliance.
Outlines the correct procedure for disposing of the appliance at the end of its lifecycle.
To Next Page