Need help?Do you have a question about the Electrolux T31200 and is the answer not in the manual?
General| Color | White |
|---|---|
| Loading type | Front loading |
| Dryer programs | Delicates, Synthetics, Wool |
| Type | Vented |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
General safety guidelines and precautions for operating and servicing the dryer.
Details and illustrations of the sliding door and tilting mechanism for enhanced dryer accessibility.
Detailed explanation of the sliding door's tilt functionality and its operation.
Description of the drum's suspension, material, and mounting within the dryer.
Information on standard and sliding doors, including the door switch function for safety.
Diagnostic steps for troubleshooting issues with the sliding door's tilt function.
Steps to diagnose and resolve problems with the display on sliding door models.
Function, location, and manual resetting procedure for inlet air overheating thermostats.
Function, resistance characteristics, and replacement of the inlet air thermistor.
Function, location, and manual resetting procedure for outlet air overheating thermostats.
Function and measurement of the outlet air thermistor for temperature control.
Details on overheating thermostats in gas dryers and associated error codes.
Diagnosis and troubleshooting for gas error code E14, including ignition failure.
Procedure for resetting gas errors and the importance of air supply.
Instructions for replacing or adjusting gas burners, electrodes, and flame sensors.
Function and error code (E08) for overheating thermostats in steam dryers.
Details on the three overheating thermostats in electric dryers and error code E08.
Step-by-step guide for replacing electric heating elements.
Comprehensive procedure for replacing drum support rollers, bearings, or the drum itself.
Critical procedure for safely returning a tilted dryer to an upright position.
Identification of gas valve components and the importance of correct nozzle orifice size.
Procedure for measuring and adjusting nozzle pressure for optimal gas burner operation.
Procedure for measuring the gas supply pressure and ensuring it meets requirements.
To Next Page
