Need help?Do you have a question about the Electrolux T3900 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | T3900 |
| Category | Dryer |
| Language | English |
General safety guidelines for operating and maintaining the dryer.
Specifications for T3900 dryer including drum volume, weight, motors, and heat effect.
Specifications for T31200 dryer including drum volume, weight, motors, and heat effect.
Specifications for TD100 dryer including drum volume, weight, motors, and heat effect.
Specifications for TD135 dryer including drum volume, weight, motors, and heat effect.
Overview of the dryer's main parts and their functions.
Details on the sliding door mechanism and the dryer's tilting feature.
Information related to loading capacity and procedures for the dryer.
Explanation of the control panel layout, buttons, and display features.
Procedure for checking and cleaning the dryer's exhaust duct for blockages.
Maintenance instructions for the nonreturn flap in the evacuation pipe.
Checking and cleaning the dryer's fan for lint and debris.
Instructions for checking and maintaining door gaskets on standard and sliding doors.
Details on control locations and components for dryers with standard doors.
Details on control locations and components for dryers with sliding doors.
Information on the positioning of sensors and thermostats for inlet air.
Information on the positioning of sensors and thermostats for outlet air.
Details on the vacuum shutter and its associated switch.
Information related to door and filter switches for standard doors.
Information related to door and filter switches for sliding doors.
General overview of the dryer's motor and transmission system.
Details on internal fuses used in electric heating systems.
Step-by-step instructions for dismounting the fan module.
Procedures for replacing components on the fan module, including motor and fan wheel.
Instructions for dismounting the transmission module.
Final steps after replacing motor or transmission components.
Details on the heating system for gas-fired dryers.
Details on the heating system for steam-fired dryers.
Details on the heating system for electric dryers.
Procedures for replacing drum support rollers, bearings, or the drum itself.
Specific instructions for replacing support rollers on dryers manufactured after Jan 1, 2004.
Steps for dismantling equipment related to the sliding door.
Procedure for adjusting sliding doors to ensure proper alignment and closure.
Instructions for adjusting the wire rope tension for sliding doors.
Steps for replacing the wire rope used in sliding door mechanisms.
How to adjust doors and check door gaskets for proper sealing.
Information on the locking plate and gas cylinder for sliding doors.
Details on the tilting function of the sliding door system.
Information on the gas valve, including nozzle selection and pressure adjustment.
Procedure for measuring and setting the nozzle pressure.
Procedure for measuring the gas supply pressure.
Steps for conducting a test run of the gas system after service.
General explanation of the Residual Moisture Control system and its purpose.
Instructions for replacing the collector graphite in the RMC system.
To Next Page
