Need help?Do you have a question about the Electrolux T4900 and is the answer not in the manual?
General| Brand | Electrolux |
|---|---|
| Model | T4900 |
| Category | Dryer |
| Language | English |
Specifications for the T4900 model, including drum volume, weight, motor details, capacity, and heat effect.
Specifications for the T41200 model, including drum volume, weight, motor details, capacity, and heat effect.
Specifications for the TD100 model, including drum volume, weight, motor details, capacity, and heat effect.
Specifications for the TD135 model, including drum volume, weight, motor details, capacity, and heat effect.
Overview of dryer types, features, and microprocessor control functions.
Details on sliding door mechanisms, tilt function, and the operating panel.
Detailed description of the drum, loading door, motor, heating unit, and control panel.
Steps for checking dryer operation, micro switches, and direction of rotation.
Guidelines for cleaning exhaust ducts, fan, and door gaskets.
Procedures for cleaning lint filters and internal components like the component unit.
Instructions for tightening belts and maintaining the area surrounding the dryer.
Location and function of the Selecta II PCB in dryers with standard loading doors.
Details on the placement of the Selecta II PCB in dryers with sliding doors.
Guidance on troubleshooting tilt function issues and checking fuses.
Instructions for replacing the Selecta II PCB and required programming settings.
Overview of inlet air overheating thermostats and thermistors.
Resetting inlet air thermostats and function of the PT100 sensor.
Overview of outlet air sensors, overheating thermostats, and NTC sensors.
Function and reset of outlet air overheating thermostat and NTC sensor.
Function and adjustment of the vacuum shutter switch.
Procedures for replacing and testing the door switch and lock on standard doors.
Replacement and testing of the lint filter switch for standard doors.
Details on the loading door switch for sliding doors and its replacement.
Replacement and testing of the lint filter switch for sliding doors.
Description of the fan module, transmission module, and motor protection.
Information on internal fuses for electric heated dryers and their sizes.
Procedures for dismounting and replacing the fan module and its components.
Steps for dismounting the transmission module and its associated components.
Details on gas burners, thermostats, error codes, and adjustments for gas dryers.
Information on steam calorifiers, overheating thermostats, and actuator replacement.
Information on electric heating units, thermostats, and element replacement.
Step-by-step guide for replacing the supporting rollers of the drum.
Procedures for dismounting and replacing the drum and its bearings.
Specific steps for replacing the drum in dryers with a sliding door.
Instructions for adjusting sliding doors to ensure proper parallel closure.
Procedures for adjusting and replacing the wire ropes for sliding doors.
Steps for checking and adjusting door gaskets and alignment for sliding doors.
Procedures for replacing locking plates and gas cylinders on sliding doors.
Steps for righting the dryer and troubleshooting a failing tilting function.
Identification and adjustment of gas valve components like nozzles and pressure taps.
Procedure for measuring and adjusting nozzle pressure for correct gas burner operation.
Procedure for measuring gas supply pressure and ensuring it meets requirements.
Steps for testing gas joints, flame quality, and overall system function.
Procedure for replacing the graphite collector for the RMC moisture sensing system.
To Next Page
