487 03 29 41
3
27. Sensors and overheating thermostats
Service
manual
27
Overview, Inlet air
Positioning of sensors and overheating thermostats for inlet air.
Fig. 1a+1b. Gas and Electric heating types have 1 overheating thermostat and thermistor
element on the side of the heating calorifer.
Fig. 2a+2b. Electric heated dryers have an extra overheating thermostat placed on top of
the heating elements.
(On steam heated dryers there is no inlet overheating thermostat).
On the following pages replacement and manual resetting is described.
1a
1b
2a
2b
To Next Page
Loading...
