Electrolux TD50 - Programming; Gas Reset Button

7
Programming
Programming
To enter the programming mode press service button A.
After pressing the service button A the display shows:
0 -- = Group 0.
Programthedryer,seeServiceManualforSelectaControlfromver.4.xx
forprogrammingdetails.
Gas reset button
The button Bisthegasresetbutton.
High voltage on the printed circuit board
Note that there is high voltage on the circuit board. Never touch
high voltage parts without rst breaking the current at the main
power switch.
.
1
A
B
1
1
High voltage