EasyManua.ls Logo

Electrolux TW L4 E - INSTALLATION UNDER A COUNTER; UNPACKING; Transport Packaging Removal; ELECTRICAL CONNECTION

Electrolux TW L4 E
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15mm
UNPACKING
Caution!
Before use all parts of the transport pack-
aging must be removed.
To remove the polystyrene blockages:
1. Open the load door.
2. Pull 2 plastic hoses with the polystyr-
ene blockages out from the drum.
x2
INSTALLATION UNDER A COUNTER
The appliance can be installed as free-
standing or below the kitchen counter with
correct space (see picture).
> 850 mm
600 mm
600 mm
THE LOAD DOOR REVERSAL
The load door can be installed by the user
in the opposite side. It can help to easily put
and remove the laundry or if there is a limit
to install the appliance. (see separate leaf-
let).
ELECTRICAL CONNECTION
Connect the machine to an earthed
socket, in accordance with current wiring
regulations.
Make sure that the electrical data on the
rating plate agrees with the power sup-
ply.
Always use a correctly installed shock-
proof socket.
Do not use multiple plugs and extension
cables. There is a risk of fire.
Should the appliance power supply cable
need to be replaced, this must be carried
out by our Service Centre.
Make sure not to squash or cause dam-
age to the mains plug and cable behind
the appliance.
Do not pull the mains cable to disconnect
the appliance. Always pull the mains
plug.
The plug must be dry.
electrolux 41

Related product manuals