5. If necessary, remove fluff from the filter socket and gasket. You
can use a vacuum cleaner. Place the filter back inside the filter
socket.
10.2 Emptying the water container
Empty the condensed water container after each drying cycle.
If the condensed water container is full, the programme stops
automatically. The
tank (Behälter)
symbol comes on the display
and you must empty the water container.
To empty the water container:
1. Pull the water container out keeping it in a horizontal position.
2. Pull the plastic connection out and drain the water into a basin or
equivalent receptacle.
3. Push the plastic connection back in and place the water
container back into position.
4. To continue the programme press the Start/Pause button.
31/48
CARE AND CLEANING
To Next Page
Loading...
