10.3 Cleaning the condenser
If the symbol
condenser (Kondensator)
flashes on the display,
inspect the condenser and its compartment. If it is dirty, clean it. Do
the check not less than once a 6 months.
WARNING!
Do not touch the metal surface with bare hands. Risk of injury.
Wear protective gloves. Clean carefully to avoid damaging the
metal surface.
To inspect:
1. Open the door. Pull the filter up.
2. Open the condenser cover.
3. Turn the lever to unlock the condenser lid.
32/48
CARE AND CLEANING
To Next Page
Loading...
