10:2
438 9144-01/01
Function checks
Function checks, Clarus Control
Manual operation
• Switch on the machine's main switch.
• Open the manual valves for water and for steam if the machine has
steam heating.
In the operating manual, chapter "Manual operation", one can find how to
operate the machine manually.
• Check that the drum is empty and close the door.
• Close the drain valve.
• Operate the machine manually to fill with cold water, then hot water.
Check that these water supplies are connected as they should be.
• Start the motor on wash action, and check that the motor is revolving
clockwise and anticlockwise alternately, as normal for wash action.
• Start heating by entering a final temperature and then pressing START.
Check that the steam valve opens or the heating element relay reacts,
as appropriate.
• Check that all sources of detergent supply are working as they should,
including the built-in detergent supply compartments, where present.
• Check the water and steam connections and the drain valve for signs of
any leakages.
• Empty the water from the machine and open its door.
To Next Page
Loading...
Need help?
General
