Function checks
Function checks, Exacta
Perform the following checks once the machine is
installed:
• Open the manual water valves.
• Turn on the power at the external switch.
• Put detergent into compartment 2.
• Choose a high-temperature program.
• Press the START button. If the machine is
coin-operated insert the amount of coins or
tokens shown on the display.
Once the display counter shows 0, press
START.
Check:
• that the drum rotates normally and that there
are no unusual noises.
• that there are no leaks in water supply/drain
connections.
• that water passes through the detergent
compartment and fabric conditioner
compartments.
• that the door cannot be opened during a
program.
• that the machine is heating (if the machine is
equipped with heating).
Normal spin machine (N-model)
Check:
• that the drum rotates clock-wise seen from the
front.
Fig.
1
Fig.
2
To Next Page
Loading...
Need help?
General
