WHAT TO DO IF…
Certain problems are due to lack of simple
maintenance or oversights, which can be
solved easily without calling out an engi-
neer. Before contacting your local Service
Centre, please carry out the checks listed
below.
During machine operation it is possible that
the yellow pilot light of button 8 blinks, one
of the following messages appear on the dis-
play and at the same time some acoustic
signals sound every 20 seconds to indicate
that the machine is not working:
• Problem with the water supply: « Can-
not fill water. Please check that the tap is
open and then press START/PAUSE ».
•
Problem with the water draining:
« Cannot drain the water. Please check
that the filter is clean and then press
START/PAUSE ».
•
Door open: « Please check that the
door is closed properly and then press
START/PAUSE ».
• Anti-flooding system has activated:
« Anti-flooding system has been activa-
ted. Please check inlet/drain pipe connec-
tions ».
Once the problem has been eliminated,
press the button 8 to restart the pro-
gramme. If after all checks, the problem per-
sists, contact your local Service Centre.
Problem Possible cause/Solution
The washing machine does not start:
The door has not been closed. « Please check
that the door is closed properly and then
press START/PAUSE »
• Close the door firmly.
The plug is not properly inserted in the power
socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installa-
tion.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and
the button 8 has not been pressed.
• Please turn the selector dial and press the but-
ton 8 again.
The delay start has been selected.
• If the laundry is to be washed immediately,
cancel the delay start.
The Child safety lock has been activated.
• Deactivate this device.
The machine does not fill:
The water tap is closed. « Cannot fill water.
Please check that the tap is open and then
press button START/PAUSE »
• Open the water tap.
The inlet hose is squashed or kinked. « Cannot
fill water. Please check that the tap is open
and then press button START/PAUSE »
• Check the inlet hose connection.
The filter in the inlet hose or the inlet valve filter
are blocked.
• Clean the water inlet filters. (See "Cleaning
the water inlet filters" for more details)
The door is not properly closed. « Please
check that the door is closed properly and
then press START/PAUSE »
• Close the door firmly.
52 electrolux
To Next Page
Loading...
