Model W475 W485
Comments N M N M
Capacity Drum volume in litres 75 75 85 85
Dry weight capacity Kg 8 8 9 9
Dry weight capacity lbs 18 18 20 20
Extraction Rpm 528 694 528 694
G-factor 81 140 81 140
Dimensions Width (mm) 660 660 660 660
Depth (mm) 690 690 730 730
Height (mm) 1115 1115 1115 1115
Width (in)
26” 26” 26” 26”
Depth (in)
27-3/16”
27-3/16”
28-12/16”
28-12/16”
Height (in)
43-14/16”
43-14/16”
43-14/16” 43-14/16”
Heating alternatives
Non-heated For hot water connection
°
°
°
°
Electric
°
°
°
°
Direct steam
°
°
°
°
Consumption data: Normal 60 °C (140 °F) programme (without pre-wash, 3 rinses at rated capacity,
Water Litres cold and hot per load 54/14 55/15
Electricity kWh per load 0.5 0.5
Time Minutes per load 46 46
Design features
Front panel Painted
• • • •
Stainless steel
°
°
°
°
Side panel Painted
• • • •
Stainless steel Clarus Control
®
only
°
°
°
°
Top panel Stainless steel
• • • •
Drum Large perforation, inner drum Hygiene, sluice function
°
°
- -
Functional Feature
Controls Classic Control (non-programmable)
• - •
-
Compass Control
®
(programmable) Coin-ops, smaller OPL’s
°
•
°
•
Exacta Control
®
(semi-programmable) Coin-ops, smaller OPL’s - - - -
Clarus Control
®
(fully programmable) OPL, industrial -
°
-
°
Drain Water-operated drain valve
• • • •
Electrically operated drain valve
°
°
°
°
Electric drain pump
°
°
°
°
Water recovery system Dual drain valve For water re-use - - - -
Detergent supply Detergent box Number of compartments
•
4
•
4
•
4
•
4
Automatiic liquid supply
°
°
°
°
Water inlet Hot & cold water inlet valves
• • • •
Third water inlet valve - - - -
Payment activation Coin meter Classic and Compass controls
°
°
°
°
Chipcard reader (Single System) Compass Control
®
°
°
°
°
Motor Frequency-controlled motor
•
• •
•
Legend
• Standard
o
Option
-
Not available
N Normal-spin G-factor 81
M Medium-spin G-factor 140
X Extra-spin G-factor 220 and 300
To Next Page
Loading...
