Spülen + - Rinçage + at the same time for
6 seconds.
If you deactivate the acoustic
signals, they continue operate
when the appliance has a
malfunction.
8.2 Child Lock
With this option you can prevent that the
children play with the control panel.
• To activate/deactivate this option,
press Temp. and Schleudern -
Essorage at the same time until the
indicator
comes on/goes off.
You can activate this option:
• After you press Start/Pause - Départ/
Pause : the options and the
programme knob are locked.
• Before you press Start/Pause - Départ/
Pause : the appliance cannot start.
8.3 Permanent Extra Rinse
With this option you can permanently have
an extra rinse when you set a new
programme.
• To activate/deactivate this option
press Zeit Sparen - Court and
Zeitvorwahl - Départ Différé at the
same time until the indicator Spülen + -
Rinçage + comes on/goes off.
8.4 Weight sensor activating or
deactivating
To activate or deactivate the weight
sensors, press Temp. and Optionen -
Options at the same time for some
seconds.
9. BEFORE FIRST USE
1. Put a small quantity of detergent in the
compartment for washing phase.
2. Set and start a programme for cotton
at the highest temperature without
laundry.
This removes all possible dirt from the
drum and the tub.
10. DAILY USE
WARNING!
Refer to Safety chapters.
10.1 Using weight sensors
For a correct operation of the
weight sensor, activate the
appliance and set the
programme BEFORE you put
the laundry in the drum.
10.2 Before activating the
appliance
1. Open the water tap.
2. Connect the mains plug to the mains
socket.
10.3 Activating the appliance
and setting a programme
1. Press button Auto Off to activate the
appliance.
2. Turn the programme knob to the
necessary programme.
The programme indicator comes on.
The indicator of Start/Pause - Départ/
Pause button flashes with red colour.
The display shows the default temperature
and spin and the empty indicator bars of
the available functions.
3. If it is necessary, press Temp. button
and Schleudern - Essorage button to
change the water temperature and the
spin speed.
4. If necessary, press the related buttons
to add some functions or to set a
delayed start.
The display shows the symbol of the set
function and the digit shows the delayed
time.
ENGLISH
17
To Next Page
Loading...
