Electrolux ZB2932 - Unpacking and Assembly; Unpacking the Ergorapido; Charging Station Setup

4
Unpacking and assembly / ዅၿዚૺෟႮ൝/ ҾԩЎሔࠪቍሔ
3. The wall unit can also be mounted on a wall.
Separate it from the oor unit. Always ensure that
the wall can withstand the weight of Ergorapido.
Charging station / ᆚ႖༺ቇၦ໩/ ߠ࢟ᐶ
1. Position the charging station well away from
heat sources, direct sunlight or wet places. Insert
the adaptor into the mains and connect it to the
charging station.
Unpacking and assembly / ዅၿዚૺෟႮ൝/ ގ߹۞ᓤૺᔝᓤ
2. Secure the handle by tightening the locking
screw supplied. Use a screwdriver or a coin.
1. Check that all parts are in the box. Fit the handle
by carefully inserting it into the lower main body.
Make sure that the cable does not jam.
2. On the bottom of the charging station there is a
hollow space where unused cable can be wound.
3.
ดᅰၿᆳ௴ด࿝౅ิᅎၦ௻ጁఁఋ
 ෡ఌၿᆳ࿝໏ึ൘ጁఁఋ-ZOWZIXQLWၡ
ඳ઎൐ઙ಄༘ၰ௴ดᅰၨხጸၨጁఁఋ
1. ᆚ႖༺ቇၦ໩ၔ࿩ဴჯຫ઼໓ෟཀૺ
ၰ௴ดᅰ࿝໏඀൘౞ཊགྷ࿼࿌ఢሽ൐มᅰ࿝
ິၮዽፎᆚ႖༺ቇၦ໩࿝࿨છጁఁఋ
2. ႞લౘၻ૵୾ຫ൐Ⴎၦඓ໏໷ၼၦ൐
ધႜགྷሥఁఋ౵ೡၦ෾ವ௴౏႖ၕ
ຫဧጁఁఋ
1.
ක౷ิዜၦືၴྦ࿝ၰ௴ხጸၨጁఁఋ໷ၼ
ၦ൐჎ၡዻ࿥ྤ೭ᄠมᅰ࿝ິၮዻඑધႜགྷ
ሥఁఋ
 ᇛၦ๓ၦઃ൘ხྨ౅ഛጁఁఋ
2.
ᆚ႖༺ቇၦ໩ྤ೭ᄠ࿝௴ຫဧዻხྨ௴
ᇛၦ๓ၕྤ႔ၿዾ༘ၰ௴ီ዗ዽલၦ
ၰཀఁఋ
3. ༑ܚᔝୈ၀ၢτሔᄤుъഏè
 ࢃఊთ׀૲ቍࡸٺ٩ᇉèး൚ᇛಙГుъ୆ܛ
ӼൺErgorapido֬ᇞè
1. ୓ߠ࢟ᐶᒙᏴᄀঢ়ಪჾçဤ݂ᆷതࠎӝൈ֬׀
١èࢃ൨஬ఝҳ್׏ჾѰৼࢫᇇԐ׏ᅦè
2. ูஜႲএࡼ෴࣌ઋරܬ׮൴ѪèၢൗႯઋර֞
ࠎ႞тè
1. ଶއ۞ᓤᒦࡼჅᎌݝୈဵ໡ཝăࢃ൴Ѫཱིྖ
׀ҳ್༒Ӫఝ֬༶ҍᇽ฿è
 ಙГན঴ેႼࣶӆࠎቌೝè
2. ߠ࢟ᐶ࢏ݝႼ၉԰ᇖ࡞ၢ൳Ҧئ჌֬ན
঴è