www.electronline.cl
T: 02-23023149
7
6.4. GSM/GPS LED Indicator
Green LED indicator on: No GSM network signals.
Green LED indicator flashes fast (one time each second): GSM Network signal is normally,
and tracker works under GSM mode.
Green LED indicator flashes slowly (one time each three second): Tracker works under
GPRS mode.
Blue LED indicator flashes: GPS signal is normal.
Blue LED indicator off: No GPS signals.
6.5. Initialization
Send SMS “begin+password” to the unit, it will reply “begin ok” and initialize all the settings to
default factory settings.（default password: 123456）
E.G: send SMS “begin123456”, it will reply “begin ok”.
6.6. Change Password
6.6.1 Send SMS “ password+old password+space+new password” to the unit to change the
password.
For example: send SMS “password123456 888888” to the unit. If succeeded, “password ok”
will reply to your cell phone from the device tracker.
6.6.2 Be sure to keep the new password in mind, you have to upload the software to restore the
original setting in case of losing the new password.
6.6.3 Attention: Make sure the new password is in 6 digits Arabic numbers, or else the tracker cannot
recognize the password.
6.6.4 The “+” in the command, please don’t type “+”, space means press the space keyboard on your
cell phone.
6.7. Authorization
There are 5 numbers to be allowed to authorize in the tracker at most. Please authorize phone
numbers before using this tracker device to receive alerts SMS and call authorized numbers
via the SOS button.
6.7.1 Call and track the tracker device for 10 times from cell phone in success, it will make the cell
phone number as the authorized number automatically.
6.7.2 Authorization: Send SMS “admin+password+space+cell phone number” to set up an authorized
number, the other authorized numbers should be set by the first authorized number, if the
number is successfully authorized, the unit will reply“ admin OK” by SMS.
To Next Page
Loading...