Using the radiator in manual mode
• If you don’t want to set your timing and just want to use your radiator manually in what we call easy
mode, we can remove all the icons along the top of your screen apart from the sunshine and moon.
You can then simple swap from your comfort to your economy setting as you wish manually. To set
your radiator to easy mode:
• Press and hold button 3 which says OK for 5 seconds, you will then be presented with a screen that
says ‘prog’
• Press button 4 to select no, and then press button 3 for OK.
• You will then need to press button 5 12 times until you see the word end in the middle of the screen.
• Press button 3 again to get back to the home screen.
• Now when you press button 5 you will notice that all of the icons have disappeared apart from the
sunshine and moon symbol which represent your comfort and economy settings.
• Now when you want your comfort temperature, press button 5 until your square is around the
sunshine icon, then press OK. Then when you want your economy temperature, you press button 5
then OK once your square surrounds the moon icon.
• If you then want to set timings, press and hold button 3 for 5 seconds again to be presented with the
‘prog’ parameter 01. This time, you press button 4 until it says yes, then press ok to accept you want
the full range of icons back.
• You will then need to press button 5 12 times until you see the word end in the middle of the screen.
• Press button 3 again to get back to the home screen.
• If you press button 5, you will now notice that all the icons have re-appeared along the top of the
screen and proceed to set your timings as instructed in the ‘set timings’ section of these instructions.
To Next Page
Loading...
