To set your own timings.
• You need to move fast with these actions before the radiator will go back to the home screen so please have an idea of what times you
want your radiator to come on comfort and set back settings before you begin
• Use button 5 to scroll across the icons along the top of your screen until your square surrounds the ‘P’ icon as shown in the picture above.
Press OK
• Press button 4, 10 times, until the small p1 on the right hand side of the screen reaches ‘U1’ there are 9 pre-set programmes so it will go
through all these first before you reach ‘U1’ Press OK when you reach ‘U1’ You will be presented with this screen.
• The screen above has numbers one to 7 down the left hand side; these are the days of the week. I would advise setting day 1 as Monday
with days 6 and 7 being Saturday and Sunday. (This is selected when you set the date and time) The numbers 1 – 24 along the bottom are
the hours of each day.
• The timing periods are set at 30 minute intervals which begin at 00:00 for midnight. Most people have their radiators on economy at
midnight so you can press button 2 to select the setback temperature, you will notice the time in the middle of the screen has now
changed to 00:30. Press button 2 again for each 30 minute period you want to select your set back temperature. The time on the screen
moves along at 30 minute intervals so you know what time of the day you are about to set. When you want your radiator to come on at
your comfort temperature, you then press button number 4. You will notice that a small bar has appeared along the bottom of the screen.
Press button number 4 for each 30 minute interval you want to select your comfort setting. When you want to go back to your economy
setting press button 2 again, then when you want your comfort press button 4 again. For each interval you have selected economy, there
won’t be any bars along the bottom and when you have selected comfort, you will see bars along the bottom so you can see what you
have selected at a glance. The picture above shows that we have a comfort period through the whole middle of the day and economy
setting in the evening and early hours of the morning.
• Once you have completed a full cycle for the day, you will notice that the triangle on the left has now moved down to day 2. Repeat the
above process until you have selected a set point temperature for each half hour interval for every day of the week.
• Once you have completed the process, you will automatically be directed back to the home screen with your square around the ‘auto’
icon.
• Your radiator is now set. Just check that the ‘u1’ is on the right
To Previous Page
Loading...
