Need help?Do you have a question about the Elektra Beckum TKHS 315 and is the answer not in the manual?
General| Blade Diameter | 315 mm |
|---|---|
| Motor Power | 2.2 kW |
| Max. Cutting Height at 90° | 85 mm |
| Table Size | 800 x 550 mm |
| Voltage | 230 V or 400 V (depending on model) |
Covers potential dangers like electric shock, crushing, kickback, and drawing-in hazards.
Detailed guide on safely fitting and securing the saw blade.
Procedure to ensure the saw blade is correctly aligned with the table for precise cuts.
Proper installation of the riving knife, a critical safety device for preventing kickback.
Guidance on connecting the machine to the electrical power supply, including safety checks.
Specifies requirements for dust collectors to ensure safe and effective dust extraction.
Procedure for adjusting the saw blade's cutting depth using the handwheel.
How to adjust the saw blade's angle from 0° to 45° for bevel cuts.
Instructions for performing rip cuts using the rip fence and safety precautions.
Detailed steps for safely replacing the saw blade, including necessary precautions.
To Next Page