To Next Page
R
Rachel HarmonJul 30, 2025
What to do if my Elektra Beckum TopLine PK 255 Saw motor does not run?
- SStacey WilsonJul 30, 2025
If the motor of your Elektra Beckum Saw isn't running, it might be due to a few reasons. First, a power failure could have tripped the undervoltage relay; try switching it on again. Another cause could be a lack of supply voltage, so check the cables, plug, outlet, and mains fuse. Lastly, the motor may have overheated due to a dull saw blade, too high a feed rate, or sawdust buildup in the housing. If overheating is the issue, eliminate the cause and wait a few minutes before restarting the saw.
General
