To Next PageTo Next Page
Need help?Do you have a question about the Elektra Beckum PK 300 K and is the answer not in the manual?
General| Brand | Elektra Beckum |
|---|---|
| Model | PK 300 K |
| Category | Saw |
| Language | English |
Statement of compliance with relevant standards and directives.
Defines the intended use and limitations of the precision circular saw.
Outlines the user's obligations for safe and correct operation and maintenance.
Details the manufacturer's liability regarding product damages and warranty.
Lists key technical data of the PK 300 K saw, including dimensions and motor details.
Presents measured noise emission levels (sound pressure and power) under no-load and load conditions.
Lists all components and accessories included in the standard delivery package.
Step-by-step guide for assembling the workstand and attaching it to the machine.
Adjusting the scale on the rip fence for accurate width settings.
Ensuring the rip fence is parallel to the saw blade for precise cuts.
Adjusting the 45° end stops and angle scale of the mitre fence.
Details on required electrical safety measures, earthing, and mains connection requirements.
Explanation of the no-volt release solenoid switch and motor overload protection.
How to set the cutting depth of the main blade using the handwheel.
Adjusting the saw blade angle between 90° and 45° using the handwheel.
Steps for setting the rip fence accurately using the micro-adjuster.
Procedure for removing the table section to access the chipcase for maintenance.
Properly setting the riving knife for safety and to prevent kickback.
Procedure for safely removing and installing the main saw blade.
Information on compatible saw blades, including material, size, and tooth configuration.
Diagram and list of main components and terms used in the manual.
List of available optional accessories for enhanced functionality.
Guidelines on using deflector boards, push blocks, and wedge cutting jigs for safe operation.
Essential safety guidelines for operating the saw, including guard use and hand placement.
Specific safety instructions tailored for the Elektra Beckum PK 300 K model.
Guidance on identifying and resolving common issues like stalled blades or motor overloads.
Requirements and recommendations for connecting a dust collector to the machine.
Instructions for performing through sawing, including depth and fence settings.
Steps and safety notes for performing rabbeting and grooving operations.
Guidelines for performing set-in work safely, including use of backstops.
Using the auxiliary fence for ripping stock that may open or close.
Performing crosscuts using the mitre fence or sliding carriage.
Method for cutting tenons and slots using a push block and rip fence.
Procedure for cutting tenon shoulders using the mitre fence or sliding carriage.
Using a wedge cutting jig for cutting wedges or tapers accurately.
Using the optional sliding carriage for precise dimensioning of workpieces.
Procedure for adjusting the saw blade's position in the table slot for optimal cutting.
Instructions for adjusting the belt tension on the machine's motor.
Recommendations for protecting the machine and regular lubrication of moving parts.
Cleaning and maintenance procedures for saw blades to ensure performance.
Schematic diagram illustrating the electrical connections of the PK 300 K model.
Catalog of optional accessories with corresponding stock numbers for purchase.
Wiring color codes and connection procedures for single-phase and three-phase motors.
