8
WORKING GEAR AND CLOTHING
(a) When using your brush cutter, you should wear
proper clothing and protective equipment as follows.
(1) Helmet
(2) Protection goggles or face protector
(3)Thick work gloves
(4)Non-slip-sole work boots
(5)Ear protectors
(b) Never use your brush cutter when wearing pants with
loose cuffs, when wearing sandals, or when bare foot.
THINGS TO CHECK BEFORE USING YOUR BRUSHCUTTER
(a)Before beginning work, look around carefully to get a feel for the shape ，and
remove any obstacles which can be cleared away.
(b) Make sure that there are no loose screws or bolts, fuel leaks, ruptures, dents,
or any other problems which mingt interfere with safe operation. Be especially
careful to check that there is nothing wrong with the blades or with the joins by
which the blades are attached to the brush cutter.
(c) Never use blades that are bent,warped,cracked,broken or damaged in any
way.
Keep the blade always sharp.
(d) Check the bolt to fasten the blade and be sure the blade turns smoothly
without abnormal noise.
To Next Page
Loading...