10
f. .when you finish cutting in one location and wish to continue work in another
spot, turn off the engine and turn the unit as the cutting parts faces away from
your body.
MAINTENANCE SAFETY PRECAUTION
a Under no circumstances should you ever take apart the brush cutter or alter it
in any way. Doing so mingt result in the brush cutter becoming damaged during
operation or the brush cutter becoming unable to operate properly.
b. . Always be sure to turn off the engine before performing any maintenance or
checking procedures.
c When sharpening, removing, or reattaching the blade, be sure to wear thick,
sturdy gloves and use only proper tools and equipment to prevent injury.
5.SET UP
HANDLE
1.Loosen the 4 bolts on the handle
bracket.
2.Insert the right handle(throttle lever is
attached)and the left handle assembly into
the braket and retighten the bolts securely.
(1)Handle bracket
(2)Right handle
(3)Bolt
To Next Page
Loading...
