Element EATDG2767CW - Door Reversal Procedure

To Next Page

To Previous Page

Dryer

Safety

Operation

Requirements

Parts and

Features

Installation

Instructions

Dryer Use

Appendix

Dryer Care

Troubleshooting

DOOR REVERSAL PROCEDURE

1 Make sure that the power cord is unplugged.

2 While supporting the door, remove the four hinge screws from the door,

then lift the door to remove it and set the door aside .

Remove the screws for the locker cover on the right side of the dryer

and the screws for the locker cover on the left side of the dryer.

4 Install the locker onto the right side of the dryer with the screws you

just removed, then install the locker cover on the left side of the dryer.

Remove the

locker screws

Remove the

locker cover

screws

Remove the two screws

Operation

3-4