Element EATDG2767CW - Error Codes

ERROR CODES
Error Warning Solutions
The PCB failed. Call the service center for
help do not use dryer.
The humidity
sensor failed.
The unit will complete the
current operating cycle
but garments could be
over dried.
The unit can still operate
under the Time Cycles.
Call the service center for
help.
The temperature
sensor failed.
Call the service center for
help do not use dryer.
Possible Cause
The “Drying”, “Cooling” and “Wrinkle Care ”
(option) lights flicker
The “Cooling”, “Wrinkle Care”(process) and
“Wrinkle Care ” (option) lights flicker
The “Wrinkle Care”(process), “Clean Filter” and
“Wrinkle Care ” (option) lights flicker
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use
Appendix
Dryer Care
Troubleshooting
42
*When error happening, the buzzer will beep 5 seconds and repeat once
per 15 minutes. After 24 hour, machine will power off automatically.