USING THE CONTROL PANEL
°C / °F
4
5
1.0 User interface introduction
FRIDGE: Fridge temperature control of the appliance
FREEZER/SUPER 3s: Temperature control of the
appliance. Select and deselect super mode control.
ALARM: Clear door opening alarm.
LOCK: Locking and unlocking.
1.1 LED Display
1. Display window for preset temperature
2. Super mode icon
3. Fahrenheit
4. Celsius
5. Locking and unlocking icon
2.0 Illustration of the buttons
All buttons are valid only in unlocking status.
Short beep after per touching of buttons.
2.1 FRIDGE: temperature control of the appliance
available only for user defined mode.
Touching “FRIDGE” button consecutively, the
temperature will change in a circle from 2°C (35°F) ~
8°C (47°F), stop touching and after 5 seconds flashing,
temperature is set.
2.2 FREEZER: tempera
ture control
of the appliance
available only for user defined mode.
Touching “FREEZER” button consecutively, the
temperature will change in a circle from -14°C (7°F) ~
-22°C (8°F), stop touching and after 5 seconds
flashing, temperature is set.
SUPER 3s: select and deselect super mode.
Press “SUPER 3s” button to select super mode
when the product is in FREEZER mode. After 5
seconds flashing of super mode icon, super mode is
selected.
When super mode is selected, super mode icon will
light on and display window will show -25°C (-13°F).
In super mode, touching “FREEZER” button, super
mode icon will flash 3 times, but freezer temperature
cannot be changed.
To exit Super mode,
-Press “SUPER” button to deselect Super mode,
-
Or after 50 ho
urs of super
mode without any
operation, the refrigerator will automatically stop it
and enter into previous setting.
Warning:
In super mode, noise of the appliance may be slightly
higher than normal running.