Do you have a question about the ELEMENTI OFG101NG and is the answer not in the manual?
This fire table is intended solely for outdoor use; indoor use can lead to serious harm or death.
Immediate steps to take if gas is detected, including shutting off supply and contacting authorities.
Emphasizes that installation and service must be done by qualified professionals to prevent hazards.
Details the necessary safe distances from the unit to combustible materials.
Prohibits indoor use to prevent deadly carbon monoxide buildup, emphasizing outdoor ventilation.
Covers risks of leaving unattended, impaired operation, flammable attire, and leaning over the unit.
Advises against use in windy conditions and specifies prohibited locations like under structures or near vehicles.
Prohibits storing flammable liquids and materials near the unit to prevent fire hazards.
Specifies using only approved natural gas components and safe disconnection procedures.
Highlights that children should not operate the unit and keeping them away from hot lava rocks.
Emphasizes regular cleaning of the unit and pre-operation checks of hoses and burners for safety.
Strictly prohibits conversion to or use of Liquid Propane, stating it is dangerous and can cause severe injury or damage.
Warns that unauthorized alterations to the fire table will void the manufacturer's warranty.
Mandates disconnection of the appliance during high-pressure gas piping system tests to prevent damage.
States that burner valves are factory pre-tested for natural gas and conversion is prohibited.
Instructions for installing the AAA battery into the igniter unit.
Guidance on properly placing lava rocks around the burner to ensure correct ignition.
Instructions for adjusting the feet to ensure the fire pit is level for stable and safe operation.
Details the process of connecting the fire table to the natural gas supply line and socket.
Explains how to prepare and connect the gas supply socket to the house gas source using appropriate compounds.
Details how to use the quick connect socket to securely attach the gas hose to the fire table.
Essential checks before each operation, including hose integrity and secure burner connections.
Step-by-step guide to performing a leak test on gas connections using a soap solution.
Step-by-step guide for lighting the fire table using its built-in igniter.
Instructions for lighting the fire table using an external long match or lighter.
Procedure for safely shutting down the fire table by turning off the control knob and gas supply.
Guidelines for inspecting the fire table before use to ensure safety and proper function.
Instructions for safely storing the fire table, including covering and location.
Guidance on cleaning surfaces, applying sealers, and maintaining the fire bowl.
Ensures the electrode wire is properly connected to the igniter box for reliable ignition.
Ensures the pilot housing is clear of debris for proper gas flow and ignition.
Details correct positioning of the igniter pin and thermocouple for optimal spark and heat sensing.
Ensures the thermocouple wire is correctly aligned with the valve for accurate temperature feedback.
Addresses common causes and solutions when the burner fails to ignite using the igniter.
Provides troubleshooting steps for when the burner does not ignite using an external match or lighter.
Explains potential causes and solutions for excessive black smoke emission during operation.
Diagnoses reasons for reduced flame height or sudden gas flow interruption.
Offers solutions for uneven flame distribution or incomplete burner coverage.
Addresses causes for the flame extinguishing, such as wind or gas supply issues.
| Model | OFG101NG |
|---|---|
| Shape | Square |
| Fuel Type | Natural Gas |
| Product Type | Fire Pit |
| Fuel Type (Optional) | Propane |
| Includes | Burner, Cover |
Loading...