Need help?Do you have a question about the Elenco Electronics CM-1555 and is the answer not in the manual?
General| Type | Digital |
|---|---|
| Display Type | LCD |
| Display Digits | 3.5 |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Transistor Test | Yes |
| Square Wave Output | No |
| Battery Type | 9V |
| AC Voltage Range | 200V - 750V |
| DC Current Range | 200µA - 10A |
| Resistance Range | 200Ω - 2MΩ |
| DC Voltage Range | 200mV - 1000V |
Details the LCD display type and maximum reading.
Explains the automatic polarity indication method.
Describes how overrange conditions are shown on the display.
Notes the automatic zeroing feature for measurements.
Explains the symbol indicating low battery voltage.
Specifies the nominal measurement update frequency.
Defines the recommended operating temperature and humidity limits.
Outlines the recommended storage temperature and humidity.
Details the conditions under which accuracy is specified.
Specifies the type of battery required for operation.
Provides an estimate of typical battery operating hours.
Lists the height, width, and depth of the meter.
States the approximate weight of the device with the battery.
Lists all items included with the capacitance meter.
Crucial safety reminder to discharge capacitors before measurement.
Step-by-step guide for using the capacitance meter.
Instructions for replacing the 9V battery.
Guidance on replacing the protective fuse.
